Home > Products > Splitter , Switch,Extender and Converter > HDMI VGA Extender > HDMI Extender 164Feet/50Meter 1080P

  • HDMI Extender 164Feet/50Meter 1080P
  • HDMI Extender 164Feet/50Meter 1080P
  • HDMI Extender 164Feet/50Meter 1080P
  • HDMI Extender 164Feet/50Meter 1080P
  • HDMI Extender 164Feet/50Meter 1080P
HDMI Extender 164Feet/50Meter 1080PHDMI Extender 164Feet/50Meter 1080PHDMI Extender 164Feet/50Meter 1080PHDMI Extender 164Feet/50Meter 1080PHDMI Extender 164Feet/50Meter 1080P

HDMI Extender 164Feet/50Meter 1080P

  • Product Item : KS-HEC501
  • Category: HDMI VGA Extender
  • Product description:HDMI Extender 164Feet/50Meter 1080P@60Hz 3D HDMI Repeater (TX and RX) RJ45 to HDMI Converter Transfer Single by Cat5e/Cat6/Cat7/Cat8 Cable with 5V Power Adapter
  • Order online
  • 1.This is the HDMI Extender over single cat5e/6 cable, Support EDID handling abilities.
  • 2.Use single UTP LAN cable(Cat 6)to substitute HDMI cable to achieve long distance transmission, the UTP cable follows the standard of IEEE-568E.
  • 3.Support lossless compressed digital audio: Dolby TrueHD, DTS-HD Master Audio.
  • 4.Connect the display devices to the HDMI output port. on the Reciver pcs
  • 5.Transmission distance extend up to 50m under 1080p.The data transfer speed 6.75Gbps.


Specifications:

1.HDMI resolution: 3D/1080p/1080i/720p/576p/576i/480p/480i
2.Support video color format: 24bit/deep color 30bit,36bit
3.Support audio format: DTS-HD/Do;bytrueHD/LPCM7.1/DTS/Dolby-AC3/DSD
4.Max bandwidth: 2250MHz
5.Max baud rate: 6.75Gbps
6.Max working current: 5V/800MA
7.Power consumption: 5watts(Max)
Connecting and Operating
1.Connect the HDMI signal source(Such as PS3,STB ect)HDMI Sender over the HDMI cable
2.Connect CAT5e/6/7/8 cables with both the outputs of the Sender and inputs of the Receiver over the utp port.(The cables must follow the standard of EIA-TIA 568B)
3.Connect the Receiver one with the Display device(such as TV/Projector and so on)over the HDMI cable.
4.Connect the power adapter at the both Sender and receiver over the Power port